Voltage Options: Single phase: 120/240V Three Phase - 120/208, 120/240, 277/480, 600V
Available Options
Starting aids
Battery charger:✓
Block heater:✓
Battery blanket :✓
Enclosure
Open set :✓
SA enclosure :✓
Fuel tank
No fuel tank :✓
24 hr :✓
48 hr :✓
72 hr :✓
96 hr :✓
Generator End
Anti condensation heater :✓
PMG :✓
Controllers
DSE 7310 control panel :✓
DES 8610 control panel (paralleling) :✓
Remote annunciator :✓
Engine
Engine Specifications: 1.800 r.p.m.
Rated Output: 61kW prp ; 67kW standby
Manufacturer: FPT_IVECO
Model: NEF45SM2X
Engine Type: 4-stroke diesel
Injection Type: Direct
Aspiration Type: Turbocharged
Number of cylinders and arrangement: 4-L
Bore and Stroke: 104 x 132 mm
Displacement: 4,5 L
Cooling System: Liquid (water + 50% glycol)
Lube Oil Specifications: ACEA E3 - E5
Compression Ratio: 17,5
Fuel Consumption ESP: 5.05 Gal/h
Fuel Consumption 100% PRP: 4.57 Gal/h
Fuel Consumption 80 % PRP: 3.8 Gal/h
Fuel Consumption 50 % PRP: 2.72 Gal/h
Lube oil consumption with full load: 0,1 % of fuel consumption
Total oil capacity including tubes, filters: 12,8 L
Total coolant capacity: 18,5 L
Governor Type: Mechanical
Air Filter Type: Dry
Alternator
Generator: STAMFORD
Model: UCI224F
Poles: 4
Connection type (standard): Series
Mounting type: S-3 11"1/2
Insulation: H class
Enclosure (according IEC-34-5): IP23
Exciter system: Self-excited, brushless
Voltage regulator: A.V.R. (Electronic)
Bracket type: Single bearing
Coupling system: Flexible disc
Coating type: Standard (Vacuum impregnation)
Installation
- EXHAUST SYSTEM.
Maximum exhaust temperature: 932 ºF
Maximum allowed back pressure: 5 kPa
Heat dissipated by exhaust pipe: 778 KCal/Kwh
- NECESSARY AMOUNT OF AIR.
Intake air flow: 247 scfm
Cooling Air Flow: 4,873 scfm
Alternator fan air flow: 595 scfm
- STARTING SYSTEM.
Starting power: 3 kW
Starting power: 4.02 HP
Recommended battery: 100 Ah
Auxiliary Voltage: 12 Vdc
- FUEL SYSTEM
Fuel Oil Specifications: Diesel
Dimensions
- DIMENSIONS.
Length: 85 in
Height: 60 in
Width: 42.91 in
Maximum shipping volume: 127.13 ft3
Power Equipment Built Around Your Timeline
WPP keeps a large inventory of power generation equipment and supports customers with practical guidance from selection through delivery.
Whether you are replacing aging equipment, sourcing for a project, or coordinating a larger power package, our team helps you find the right fit and move forward with confidence.
Large Equipment Inventory
New, used, and refurbished generators, engines, and accessories.
Project-Ready Support
Help with sizing, submittals, equipment matching, and coordination.
One-Stop Shop
Sales, rental, service, and parts support under one roof.